16 18 20 22 Gauge High Temperature Extruded PTFE Hook Up Wire
PTFE insulated equipment/ hookup wires are generally used for internal wiring of various electronic and electrical equipments and other electrical purposes. They are most suitable to use in equipments involving for high frequency signals. Uniformity of insulation thickness around the conductor and very low dielectric constant of PTFE enables the transmission of high frequency signals with minimized signal losses as compared to other wires resulting in high quality signal transmission.
.
Features:
Good corrosion-resistance,almost doesn't melt any organic imp regnant, Oil-resistance, strong acid-resistance, strong alkali-resistance,oxidant-resistance and so on. bear the good electric insulated capability, high voltage-resist, moisture-resistance, high insulation resistance; flame-retardant, Anti-ageing, long age of usage.
Properties:
1. Rated voltage: 125V, 300V, 600V
2. Working temperature: -65℃ ~ +250℃
3. Conductor: Silver Coated Copper Stranded Wire
4. Insulation: Ptfe
5. Colors: Blue, Red, Yellow, White, Black, Brown, Gray, Green, Purple...
| Silver coated copper conductor PTFE insulated lead wire |
| Silver coated copper conductor PTFE insulation shield lead wire |
| Silver coated stranded copper conductor PTFE insulated shield lead wire |
| Silver coated stranded copper conductor PTFE insulated twisted shield lead wire |
|
Nominal Section (mm2) |
Conductor Construction |
Insulation Thickness (mm) |
Outer Diameter (mm) |
D.C. conductor resistance at 20ºC(Ω/km) |
|
| Tinned copper | Silver coated copper | ||||
| 0.05 | 10/0.08 | 0.3 | 0.9 | 383 | 370 |
| 0.06 | 7/0.10 | 0.3 | 0.9 | 348 | 339 |
| 0.08 | 7/0.12 | 0.3 | 0.96 | 286 | 280 |
| 0.1 | 7/0.14 | 0.3 | 1.02 | 157 | 150 |
| 0.12 |
7/0.15 30/0.07 |
0.3 | 1.05 | 152 | 145 |
| 0.14 |
7/0.16 19/0.10 |
0.3 | 1.08 | 136 | 130 |
| 0.15 | 30/0.08 | 0.3 | 1.1 | 111 | 105 |
| 0.2 |
7/0.02 19/0.12 |
0.3 | 1.2 | 87 | 82 |
| 0.35 | 19/0.16 | 0.3 | 1.4 | 57 | 54 |
| 0.5 | 19/0.18 | 0.3 | 1.5 | 40 | 37.5 |
| 0.8 | 19/0.23 | 0.32 | 1.79 | 24 | 23 |
| 1 | 19/0.26 | 0.35 | 2 | 21 | 20 |
| 1.2 | 19/0.28 | 0.45 | 2.3 | 19 | 18 |
| 1.5 | 19/0.32 | 0.45 | 2.5 | 13 | 12 |
| 2 | 19/0.37 | 0.45 | 2.75 | 10 | 9 |
| 2.5 | 37/0.30 | 0.55 | 3.2 | 8 | 7 |
| 3 | 37/0.32 | 0.68 | 3.6 | 6.8 | 6.4 |
Noted: Specification and core no. are not limited to above regulation, they could be customized.
